ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

Page de 246
Chapter 9 Monitor
NBG6616 User’s Guide
72
Figure 43   
Monitor > Packet Statistics 
The following table describes the labels in this screen.
9.6  WLAN Station Status     
Click Monitor > WLAN 2.4G/5G Station Status or the WLAN 2.4G/5G Station Status 
(Details...)
 hyperlink in the Status screen. View the wireless stations that are currently associated 
to the NBG6616’s 2.4GHz or 5GHz wireless network in the Association List. Association means 
that a wireless client (for example, your network or computer with a wireless network card) has 
connected successfully to the AP (or wireless router) using the same SSID, channel and security 
settings.
Table 24   
Monitor > Packet Statistics
LABEL
DESCRIPTION
Port
This is the NBG6616’s interface type.
Status 
For the LAN ports, this displays the port speed and duplex setting or Down when the 
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet 
encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and Drop 
(dropping a call) if you're using PPPoE encapsulation. This field displays Down when 
the line is disconnected.
For the 2.4GHz or 5GHz WLAN, it displays the maximum transmission rate when the 
WLAN is enabled and Down when the WLAN is disabled.
TxPkts 
This is the number of transmitted packets on this port.
RxPkts 
This is the number of received packets on this port.
Collisions 
This is the number of collisions on this port.
Tx B/s 
This displays the transmission speed in bytes per second on this port.
Rx B/s
This displays the reception speed in bytes per second on this port.
Up Time
This is the total time the NBG6616 has been for each session.
System Up Time
This is the total time the NBG6616 has been on.
Poll Interval(s)
Enter the time interval in seconds for refreshing statistics in this field.
Set Interval
Click this button to apply the new poll interval you entered in the Poll Interval(s) 
field.
Stop
Click Stop to stop refreshing statistics.