ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation
Chapter 10 WAN
NBG6616 User’s Guide
82
10.5 Advanced WAN Screen
To change your NBG6616’s advanced WAN settings, click Network > WAN > Advanced. The
screen appears as shown.
screen appears as shown.
Figure 49
Network > WAN > Advanced
DNS Server
First DNS Server
Second DNS
Server
Server
Third DNS Server
Select Obtained From ISP if your ISP dynamically assigns DNS server information (and
the NBG6616's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
the NBG6616's WAN IP address). The field to the right displays the (read-only) DNS
server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right.
IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
server, you must know the IP address of a computer in order to access it.
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by using
the NBG6616’s MAC address, copying the MAC address from a computer on your LAN or
manually entering a MAC address.
the NBG6616’s MAC address, copying the MAC address from a computer on your LAN or
manually entering a MAC address.
Factory default
Select Factory default to use the factory assigned default MAC Address.
Clone the
computer’s MAC
address - IP
Address
computer’s MAC
address - IP
Address
Select Clone the computer's MAC address - IP Address and enter the IP address of
the computer on the LAN whose MAC you are cloning.
the computer on the LAN whose MAC you are cloning.
Set WAN MAC
Address
Address
Select this option and enter the MAC address you want to use.
IPv6 DNS server
This is not available when you select IPv4 Only in the IPv6/IPv4 field.
Obtain IPv6 DNS
info Automatically
info Automatically
Select this to have the NBG6616 get the IPv6 DNS server addresses from the ISP
automatically.
automatically.
Use the following
Static DNS IPv6
Address
Static DNS IPv6
Address
Select this to have the NBG6616 use the IPv6 DNS server addresses you configure
manually.
manually.
IPv6 DNS Server
Enter the IPv6 DNS server address assigned by the ISP.
Apply
Click Apply to save your changes back to the NBG6616.
Cancel
Click Cancel to begin configuring this screen afresh.
Table 27
Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
DESCRIPTION