ZyXEL Communications Corporation NBG6616 Manuel D’Utilisation

 Chapter 11 Wireless LAN

NBG6616 User’s Guide

The following table describes the labels in this screen.

Select WPA or WPA2 from the Security Mode list. 

Note: WPA or WPA2 is not available if you enable WPS before you configure WPA or WPA2 

in the Wireless LAN 2.4G/5G > General screen.

Network > Wireless LAN 2.4G/5G > General: WPA-PSK/WPA2-PSK

Security Mode

Select WPA-PSK or WPA2-PSK to enable data encryption.

WPA-PSK 
Compatible

This field appears when you choose WPA2-PSK as the Security Mode.

Check this field to allow wireless devices using WPA-PSK security mode to connect to 
your NBG6616.

Pre-Shared Key 

WPA-PSK/WPA2-PSK uses a simple common password for authentication.

Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.

Group Key Update 
Timer

The Group Key Update Timer is the rate at which the AP sends a new group key out to 
all clients. 

The default is 3600 seconds (60 minutes).

Apply

Click Apply to save your changes back to the NBG6616.

Cancel

Click Cancel to reload the previous configuration for this screen.