ZyXEL Communications Corporation NBG6716 Manuel D’Utilisation

Chapter 23 Maintenance

NBG6716 User’s Guide

Note: If you uploaded the default configuration file you may need to change the IP 

address of your computer to be in the same subnet as that of the default NBG6716 

IP address (192.168.1.1). See 

 for details on how to set up 

your computer’s IP address.

System restart allows you to reboot the NBG6716 without turning the power off. 

Click Maintenance > Restart to open the following screen. 

Maintenance > Restart

Click Restart to have the NBG6716 reboot. This does not affect the NBG6716's configuration.

Use this screen to change the language for the Web Configurator.

Select the language you prefer and click Apply. The Web Configurator language changes after a 
while without restarting the NBG6716.

Upload 

Click Upload to begin the upload process.

Note: Do not turn off the NBG6716 while configuration file upload is in progress.

After you see a “configuration upload successful” screen, you must then wait one minute 
before logging into the NBG6716 again. The NBG6716 automatically restarts in this time 
causing a temporary network disconnect.

If you see an error screen, click Back to return to the Backup/Restore screen.

Reset

Pressing the Reset button in this section clears all user-entered configuration information 
and returns the NBG6716 to its factory defaults.

You can also press the RESET button on the rear panel to reset the factory defaults of your 
NBG6716. Refer to the chapter about introducing the Web Configurator for more 
information on the RESET button.

Maintenance > Backup/Restore (continued)