ZyXEL Communications Corporation NWA1100NH Manuel D’Utilisation

Chapter 6 Wireless LAN

NWA1000 Series User’s Guide

Use this screen to choose the security mode for your NWA. 

QoS

Select the Quality of Service priority for this BSS’s traffic. 

•

If you select WMM from the QoS list, the priority of a data packet depends on the 

packet’s IEEE 802.1q or DSCP header. If a packet has no WMM value assigned to 

it, it is assigned the default priority.

•

If  you  select  WMM_VOICE, WMM_VIDEO, WMM_BESTEFFORT or 

WMM_BACKGROUND, the NWA applies that QoS setting to all of that SSID’s 

traffic. 

•

If  you  select  None, the NWA applies no priority to traffic on this SSID. 

Note: When you configure an SSID profile’s QoS settings, the NWA applies the same 

QoS setting to all of the profile’s traffic.

BSSID VLAN ID

Enter a VLAN ID for the SSID profile.

Packets coming from the WLAN using this SSID profile are tagged with the VLAN ID 
number by the NWA. 

Number of Wireless 
Stations Allowed to 
Associate

Use this field to set a maximum number of wireless stations that may connect to the 
device.

Hidden SSID

If you do not select the checkbox, the NWA broadcasts this SSID (a wireless client 
scanning for an AP will find this SSID). Alternatively, if you select the checkbox, the 
NWA hides this SSID (a wireless client scanning for an AP will not find this SSID).

Intra-BSS Traffic 
Blocking

Select this to prevent wireless clients in this profile’s BSS from communicating with 
one another.

Enable Layer-2 
Isolation 

Select this to enable layer-2 isolation for this profile. Wireless clients that connect to 
the WLAN using this SSID can access only certain pre-defined devices. See 

Intra-BSS traffic blocking is enabled automatically when you enable layer-2 isolation.

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to begin configuring this screen afresh.

SSID: Edit (continued)

LABEL

DESCRIPTION