ZyXEL Communications Corporation NWA5301NJ Manuel D’Utilisation
Chapter 12 System
NWA5301-NJ User’s Guide
120
12.4.4 Configuring WWW Service Control
Click Configuration > System > WWW to open the WWW screen. Use this screen to specify
HTTP or HTTPS settings.
HTTP or HTTPS settings.
Figure 67
Configuration > System > WWW > Service Control
The following table describes the labels in this screen.
Table 58
Configuration > System > WWW > Service Control
LABEL
DESCRIPTION
HTTPS
Enable
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using secure HTTPs connections.
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using secure HTTPs connections.
Server Port
The HTTPS server listens on port 443 by default. If you change the HTTPS server port
to a different number on the NWA, for example 8443, then you must notify people
who need to access the NWA Web Configurator to use “https://NWA IP
Address:8443” as the URL.
to a different number on the NWA, for example 8443, then you must notify people
who need to access the NWA Web Configurator to use “https://NWA IP
Address:8443” as the URL.
Authenticate Client
Certificates
Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the NWA by sending the NWA a certificate. To do that the SSL
client must have a CA-signed certificate from a CA that has been imported as a
trusted CA on the NWA.
authenticate itself to the NWA by sending the NWA a certificate. To do that the SSL
client must have a CA-signed certificate from a CA that has been imported as a
trusted CA on the NWA.
Server Certificate
Select a certificate the HTTPS server (the NWA) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates
screen.
HTTPS client. You must have certificates already configured in the My Certificates
screen.
Redirect HTTP to
HTTPS
HTTPS
To allow only secure Web Configurator access, select this to redirect all HTTP
connection requests to the HTTPS server.
connection requests to the HTTPS server.
HTTP
Enable
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using HTTP connections.
matches the IP address(es) in the Service Control table to access the NWA Web
Configurator using HTTP connections.
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service to access the NWA.
use the same port number in order to use that service to access the NWA.