ZyXEL Communications Corporation NWD271N Manuel D’Utilisation

 Chapter 2 Tutorial

NWD271N User’s Guide

Figure 7   Example WPS Process: PBC Method

When you use the PIN configuration method, you need to use both the NWD271N’s utility 
and the AP’s configuration interface.

1 In the NWD271N’s Adaptor tab, select WPS and PIN - Use this Device’s PIN. Note 

down the PIN in the screen that appears. 

2 Enter the PIN number in the AP’s configuration interface. In the NBG334W, use the 

PIN field in the Network > Wireless LAN >  WPS Station screen. 

3 Click the Start buttons on both the NWD271N utility screen and the AP’s configuration 

utility (the WPS Station screen on the NBG334W) within two minutes. 

The NWD271N authenticates the wireless client and sends the proper configuration settings to 
the wireless client. This may take up to two minutes. Then the wireless client is able to 
communicate with the NWD271N securely. 

The following figure shows you the example of configuring the wireless network and security 
on the NWD271N and the AP (ZyXEL’s NBG334W in this example) by using the PIN 
method.