ZyXEL Communications Corporation OX253P Manuel D’Utilisation
Chapter 9 The System Configuration Screens
OX253P User’s Guide
93
9.4.1 The Firmware Upload Process
When the OX253P uploads new firmware, the process usually takes about two
minutes. The device also automatically restarts in this time. This causes a
temporary network disconnect.
minutes. The device also automatically restarts in this time. This causes a
temporary network disconnect.
Note: Do not turn off the device while firmware upload is in progress!
After two minutes, log in again, and check your new firmware version in the
Status screen. You might have to open a new browser window to log in.
Status screen. You might have to open a new browser window to log in.
If the upload is not successful, you will be notified by error message.
Click Return to go back to the Firmware screen.
9.5 Configuration
Click ADVANCED > System Configuration > Configuration to back up or
restore the configuration of the OX253P. You can also use this screen to reset the
OX253P to the factory default settings.
restore the configuration of the OX253P. You can also use this screen to reset the
OX253P to the factory default settings.
Figure 36 ADVANCED > System Configuration > Configuration
Browse...
Click this to find the *.bin file you want to upload.
Upload
Click this to begin uploading the selected file. This may take up to two
minutes.
Note: Do not turn off the device while firmware upload is in
progress!
Table 32 ADVANCED > System Configuration > Firmware (continued)
LABEL
DESCRIPTION