ZyXEL Communications Corporation P8802T Manuel D’Utilisation
Chapter 7 Firewall
Basic Home Station VDSL2 P8802T User’s Guide
125
7.3.1 Firewall Rules Configuration
In the Firewall Rules screen, click Add or click a rule’s Edit button to display this screen and refer
to the following table for information on the labels.
to the following table for information on the labels.
Figure 44
Firewall Rules: Add
Active
This field displays whether a firewall rule is turned on or not. Select the check box to enable
the rule. Clear the check box to disable the rule.
the rule. Clear the check box to disable the rule.
Name
This displays the name of the rule.
Interface
This displays the LAN or WAN interface(s) to which this rule is applied.
Filter Criteria
This displays the filtering criteria, such as the source or destination IP addresses and subnet
mask to which this rule applies.
mask to which this rule applies.
Action
This displays whether the firewall silently discards packets (Drop), discards packets and
sends an ICMP message to the sender (Reject) or allows the passage of packets (Permit).
sends an ICMP message to the sender (Reject) or allows the passage of packets (Permit).
Remove
Select entries and click the Remove button to delete them.
Edit
Click the Edit button to go to the screen where you can edit the rule.
Add
Click Add to create a new rule.
Apply
Click Apply to save your changes back to the VDSL Router.
Table 37
Firewall Rules (continued)
LABEL
DESCRIPTION