ZyXEL Communications Corporation P8802T Manuel D’Utilisation

 Chapter 14 Wireless

Basic Home Station VDSL2 P8802T User’s Guide

The following table describes the general wireless LAN labels in this screen.

Click Wireless > Security to open the Security screen. Set Network Authentication to Open 
and WEP Encryption to Disabled to allow wireless stations to communicate with the VDSL Router 
without any data encryption or authentication.

Note: If you do not enable any wireless security on your VDSL Router, your network is 

accessible to any wireless networking device that is within range.

Wireless: Basic

Wireless Network Setup

Enable Wireless Turn the wireless LAN on or off.

Hide Access 
Point

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot 
obtain the SSID through scanning using a site survey tool.

Enable Wireless 
Multicast 
Forwarding 

Select this check box to convert wireless multicast traffic into wireless unicast traffic.

SSID

The SSID (Service Set IDentity) identifies the service set with which a wireless device is 
associated and serves as a name for the wireless network. Wireless devices associating to 
the access point (AP) must have the same SSID. 

Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN. 

BSSID

This shows the MAC address of the wireless interface on the VDSL Router when wireless LAN 
is enabled.

Max Clients

Set a limit for how many wireless clients can connect to the VDSL Router at a time.

Apply/Save

Click this button to save your changes.