ZyXEL Communications Corporation P8802T Manuel D’Utilisation

Chapter 14 Wireless

Basic Home Station VDSL2 P8802T User’s Guide

access point is the WPS registrar, the enrollee, or was not involved in the WPS handshake; a 
rogue device must still associate with the access point to gain access to the network. Check the 
MAC addresses of your wireless clients (usually printed on a label on the bottom of the device). If 
there is an unknown MAC address you can remove it or reset the AP. 

Use an Ethernet cable to connect a Windows Vista computer directly to one of the VDSL Router’s 
Ethernet ports to let the computer give wireless settings to the VDSL Router and then later to 
wireless clients using the WPS PIN method. 

Windows Vista Computer Connected to a VDSL Router Ethernet Port

Go to the VDSL Router’s Wireless > Security screen and copy the VDSL Router’s identification 
PIN. 

In Windows Vista, go to your network connections and double-click the ZyXEL AP icon to open the 
Windows Connect Now (WCN) screens. 

Enter the VDSL Router’s identification PIN and click Next. The computer tells the VDSL Router what 
wireless network settings to use.

After a Windows Vista computer configures the VDSL Router’s wireless settings, the same computer 
can use WPS to add wireless clients to the network. The computer also authenticates them when 
they connect to the wireless network.  

In the wireless client’s configuration utility, select the option to use its PIN to add it to the wireless 
network. 

Note: After the wireless client starts WPS configuration, you have two minutes to enter 

the PIN in the Windows Vista computer. 

In the Windows Vista network connections, an icon for the wireless client displays. Double-click it, 
enter the wireless client’s PIN, and click Next.