ZyXEL Communications Corporation P8802T Manuel D’Utilisation

Chapter 3 Device Info Screens

Basic Home Station VDSL2 P8802T User’s Guide

Route Info Screen

Each field is described in the following table.

Log into the VDSL Router’s web configurator and click Device Info > ARP to display Address 
Resolution Protocol information. This screen lists the IP addresses the VDSL Router has mapped to 
MAC addresses.

ARP Info Screen

Each field is described in the following table.

Route Info Screen

Destination

This displays the IP address to which this entry applies.

Gateway 

This displays the gateway the VDSL Router uses to send traffic to the entry’s destination 
address. 

Subnet Mask 

This displays the subnet mask of the destination net.

Flag 

This displays whether the route is up (U), the VDSL Router drops packets for this 
destination (!), the route uses a gateway (G), the target is a host (H), reinstate route for 
dynamic routing (R), the route was dynamically installed by redirect (D), or modified from 
redirect (M).

Metric 

The metric represents the “cost” of transmission for routing purposes. IP routing uses hop 
count as the measurement of cost, with a minimum of 1 for directly-connected networks.

Service 

The name of a specific service to which the route applies if one is specified.

Interface The 

interface 

through 

which this route sends traffic.

ARP Info Screen

IP address

The learned IP address of a device connected to one of the system’s ports.

Flags 

Static - static entry, Dynamic - dynamic entry that is not yet complete, Complete - 
dynamic entry that is complete.

HW Address 

The MAC address of the device with the listed IP address.

Device 

The interface through which the VDSL Router sends traffic to the device listed in the entry.