ZyXEL Communications Corporation PRESTIGE310S Manuel D’Utilisation
Prestige 310 Broadband Sharing Gateway
Transferring Files
10-8
This is when a user I.D. and password is automatically
supplied to the server for anonymous access. Anonymous
logins will work only if your ISP or service administrator has
enabled this option.
supplied to the server for anonymous access. Anonymous
logins will work only if your ISP or service administrator has
enabled this option.
•
Normal.
The server requires a unique User ID and Password to login.
Transfer Type
Transfer files in either ASCII (plain text format) or in binary
mode.
mode.
Initial Remote
Directory.
Directory.
Specify the default remote directory (path).
Initial Local
Directory.
Directory.
Specify the default local directory (path).
1.1.1 Upload Router Firmware using TFTP
Even though TFTP should work over WAN as well, it is not recommended.
To use TFTP, your workstation must have both telnet and TFTP clients. To update your firmware, follow the
procedure below.
Step 1.
To use TFTP, your workstation must have both telnet and TFTP clients. To update your firmware, follow the
procedure below.
Step 1.
Use telnet from your workstation to connect to the Prestige and log in. Because TFTP does not
have any security checks, the Prestige records the IP address of the telnet client and accepts TFTP
requests only from this address.
have any security checks, the Prestige records the IP address of the telnet client and accepts TFTP
requests only from this address.
Step 2.
Put the SMT in Command Interpreter (CI) mode by entering 8 in Menu 24 – System
Maintenance.
Maintenance.
Step 3.
Enter command “
sys stdio 0
” to disable the SMT timeout, so the TFTP transfer will not be
interrupted. Enter command “
sys stdio 5
” to restore the five-minute SMT timeout (default)
when the file transfer is complete.
Step 4.
Launch the TFTP client on your workstation and connect to the Prestige.
Step 5.
Go to SMT menu 24.7.1. Note that you must remain in this menu until file transfer is complete.
Step 6.
Use the TFTP client to transfer files between the Prestige and the workstation.
Step 7.
Specify “ras” as the remote filename if you want to upload firmware from your workstation into
the Prestige.
the Prestige.
Step 8.
The system reboots automatically after a successful firmware upload.
Note that the telnet connection must be active and the SMT in CI mode before and
during the TFTP transfer. TFTP and FTP over WAN will not work if you have applied a
filter in Menu 11.5 to block Telnet service from the WAN.
For details on TFTP commands, please consult the documentation of your TFTP client program. For UNIX,
use “
use “
put
” to transfer from the workstation to the Prestige, and “binary” to set binary transfer mode.