ZyXEL Communications Corporation PRESTIGE310S Manuel D’Utilisation

Use Time Server when
Bootup=

Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are Daytime (RFC 867), Time (RFC-868),
NTP (RFC-1305) and None. The main differences between them are the
format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
zone of the server while the Time (RFC-868) format gives a 4-byte
integer giving the total number of seconds since 1/1/1970 at 0:0:0. The
NTP (RFC-1305) format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to 2000/01/01 0:0:0.

Time Server IP
Address=

Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.

Current Time:

New Time

Enter the new time in hour, minute and second format.

Current Date:

New Date

Enter the new date in year, month, date format.

Time Zone= GMT+0800

Press the [SPACE BAR] to set the time difference between your time
zone and Greenwich mean Time (GMT). Be aware if/when daylight

             Menu 24.10 - System Maintenance - Time and Date Setting

          Use Time Server when Bootup= None
          Time Server IP Address= N/A

          Current Time:

00 : 00 : 00

          New Time (hh:mm:ss):

1  : 3  : 16

          Current Date:

2000/ 01  / 01

          New Date (yyyy-mm-dd):

2000/ 01  / 01

          Time Zone= GMT+0800

                    Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.