ZyXEL Communications Corporation VMG1312B10A Manuel D’Utilisation

Chapter 7 Wireless

VMG1312-B10A User’s Guide

Use this screen to view your Device’s MAC filter settings and add new MAC filter rules. Click 
Network Setting > Wireless > MAC Authentication. The screen appears as shown.

Wireless > MAC Authentication

The following table describes the labels in this screen.

Use this screen to configure WiFi Protected Setup (WPS) on your Device.

WPS allows you to quickly set up a wireless network with strong security, without having to 
configure security settings manually. Set up each WPS connection between two devices. Both 
devices must support WPS. See 

 for more information about WPS.

Wireless > MAC Authentication

SSID

Select the SSID for which you want to configure MAC filter settings.

MAC Restrict 
Mode 

Define the filter action for the list of MAC addresses in the MAC Address table. 

Select Disable to turn off MAC filtering.

Select Deny to block access to the Device. MAC addresses not listed will be allowed to 
access the Device. 

Select Allow to permit access to the Device. MAC addresses not listed will be denied access 
to the Device. 

Add new MAC 
address

Click this if you want to add a new MAC address entry to the MAC filter list below.

Enter the MAC addresses of the wireless devices that are allowed or denied access to the 
Device in these address fields. Enter the MAC addresses in a valid MAC address format, that 
is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.

#

This is the index number of the entry.

MAC Address

This is the MAC addresses of the wireless devices that are allowed or denied access to the 
Device.

Modify

Click the Delete icon to delete the entry.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.