ZyXEL Communications Corporation VMG1312B10C Manuel D’Utilisation

 Chapter 7 Home Networking

VMG1312-B10C User’s Guide

The following table describes the labels in this screen.

This section shows how to install UPnP in Windows Me and Windows XP. 

Follow the steps below to install the UPnP in Windows Me. 

Click Start and Control Panel. Double-click Add/Remove Programs.

Network Setting > Home Networking > UPnP

UPnP

Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to open 
the web configurator's login screen without entering the Device's IP address (although you 
must still enter the password to access the web configurator).

UPnP NAT-T

Select Enable to allow UPnP-enabled applications to automatically configure the Device so 
that they can communicate through the Device by using NAT traversal. UPnP applications 
automatically reserve a NAT forwarding port in order to communicate with another UPnP 
enabled device; this eliminates the need to manually configure port forwarding for the UPnP 
enabled application. 

The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.

#

This is the index number of the UPnP NAT-T connection.

Description

This is the description of the UPnP NAT-T connection.

IP Address

This is the IP address of the other connected UPnP enabled device.

External Port

This is the external port number that identifies the service.

Internal Port

This is the internal port number that identifies the service.

Apply

Click Apply to save your changes.

Cancel

Click Cancel to exit this screen without saving.