ZyXEL Communications Corporation VMG1312B10C Manuel D’Utilisation
Chapter 6 Wireless
VMG1312-B10C User’s Guide
70
6.2.2 Basic (WEP Encryption)
WEP encryption scrambles the data transmitted between the wireless stations and the access points
(AP) to keep network communications private. Both the wireless stations and the access points
must use the same WEP key.
(AP) to keep network communications private. Both the wireless stations and the access points
must use the same WEP key.
Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all the
wireless devices in your network support. For example, use WPA-PSK or WPA2-PSK
if all your wireless devices support it, or use WPA or WPA2 if your wireless devices
support it and you have a RADIUS server. If your wireless devices support nothing
stronger than WEP, use the highest encryption level available.
Your Device allows you to configure up to four 64-bit or 128-bit WEP keys but only one key can be
enabled at any one time.
enabled at any one time.
In order to configure and enable WEP encryption, click Network Setting > Wireless to display the
General screen, then select Basic as the security level.
General screen, then select Basic as the security level.
Figure 30
Wireless > General: Basic (WEP)
The following table describes the labels in this screen.
Table 17
Wireless > General: Basic (WEP)
LABEL
DESCRIPTION
Security Level
Select Basic to enable WEP data encryption.
Generate
password
automatically
password
automatically
Select this option to have the Device automatically generate a password. The password field
will not be configurable when you select this option.
will not be configurable when you select this option.