ZyXEL Communications Corporation VMG1312B10C Manuel D’Utilisation
Chapter 6 Wireless
VMG1312-B10C User’s Guide
83
6.7.1 WDS Scan
You can click the Scan icon in Wireless > WDS to have the Device automatically search and
display the available APs within range. Select an AP and click Apply to have the Device establish a
wireless link with the selected wireless device.
display the available APs within range. Select an AP and click Apply to have the Device establish a
wireless link with the selected wireless device.
Figure 40
WDS: Scan
The following table describes the labels in this screen.
Remote Bridge
MAC Address
MAC Address
You can enter the MAC address of the peer device by clicking the Edit icon under Modify.
#
This is the index number of the entry.
MAC Address
This shows the MAC address of the peer device.
You can connect to up to 4 peer devices.
Modify/Delete
Click the Edit icon and type the MAC address of the peer device in a valid MAC address
format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
format (six hexadecimal character pairs, for example 12:34:56:78:9a:bc).
Click the Delete icon to remove this entry.
Scan
Click the Scan icon to search and display the available APs within range.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.
Table 26
Network Setting > Wireless > WDS (continued)
LABEL
DESCRIPTION
Table 27
WDS: Scan
LABEL
DESCRIPTION
Wireless Bridge Scan Setup
Refresh
Click Refresh to update the table.
#
This is the index number of the entry.
SSID
This shows the SSID of the available wireless device within range.
BSSID
This shows the MAC address of the available wireless device within range.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to restore your previously saved settings.