ZyXEL Communications Corporation VMG1312T10C Manuel D’Utilisation
Chapter 9 Quality of Service (QoS)
VMG1312-T10C User’s Guide
129
9.6 The QoS Game List Screen
Use this screen to give priority to traffic for specific games. Click Advanced Setup > QoS > Game
List to open the screen as shown next.
List to open the screen as shown next.
Figure 86
Network Setting > QoS > Game List
The following table describes the labels in this screen.
Committed
Rate
Rate
Specify the committed rate. When the incoming traffic rate of the member QoS classes is
less than the committed rate, the device applies the conforming action to the traffic.
less than the committed rate, the device applies the conforming action to the traffic.
Committed
Burst Size
Burst Size
Specify the committed burst size for packet bursts. This must be equal to or less than the
peak burst size (two rate three color) or excess burst size (single rate three color) if it is also
configured.
peak burst size (two rate three color) or excess burst size (single rate three color) if it is also
configured.
This is the maximum size of the (first) token bucket in a traffic metering algorithm.
Conforming
Action
Action
Specify what the Device does for packets within the committed rate and burst size (green-
marked packets).
marked packets).
•
Pass: Send the packets without modification.
•
DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark value to
use.
Non-
Conforming
Action
Conforming
Action
Specify what the Device does for packets that exceed the excess burst size or peak rate and
burst size (red-marked packets).
burst size (red-marked packets).
•
Drop: Discard the packets.
•
DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark value to
use. The packets may be dropped if there is congestion on the network.
Available Class
Selected Class
Select a QoS classifier to apply this QoS policer to traffic that matches the QoS classifier.
Highlight a QoS classifier in the Available Class box and use the > button to move it to the
Selected Class box.
Selected Class box.
To remove a QoS classifier from the Selected Class box, select it and use the < button.
Apply
Click Apply to save your changes.
Cancel
Click Cancel to exit this screen without saving.
Table 45
Policer Setup: Add/Edit (continued)
LABEL
DESCRIPTION
Table 46
Network Setting > QoS > Game List
LABEL
DESCRIPTION
Enable Game List Select this to have QoS give the highest priority to traffic for the games you specify. This
priority is higher than the other QoS queues.
Select the games below.
Apply
Click this to save your changes.
Cancel
Click this to restore your previously saved settings.