ZyXEL Communications Corporation VMG1312T10C Manuel D’Utilisation
Chapter 25 Remote Management
VMG1312-T10C User’s Guide
211
25.5.1 Configuring SNMP
To change your Device’s SNMP settings, click Maintenance > Remote MGMT > SNMP tab. The
screen appears as shown.
screen appears as shown.
Figure 146
Maintenance > Remote MGMT > SNMP
The following table describes the labels in this screen.
Table 89
Maintenance > Remote MGMT > SNMP
LABEL
DESCRIPTION
Server Port
This displays the port the SNMP agent listens on. If the number is grayed out, it is not
editable.
editable.
Server Access
Select the interfaces through which a computer may access the Device using this service.
Secured Client IP
Address
Address
A secured client is a “trusted” computer that is allowed to access the SNMP agent on the
Device.
Device.
Select All to allow any computer to access the SNMP agent.
Choose Range to just allow the computers with an IP address in the range that you
specify to access the Device using this service.
specify to access the Device using this service.
Get Community
Enter the Get Community, which is the password for the incoming Get and GetNext
requests from the management station. The default is public and allows all requests.
requests from the management station. The default is public and allows all requests.
Set Community
Enter the Set community, which is the password for incoming Set requests from the
management station. The default is public and allows all requests.
management station. The default is public and allows all requests.
Trap Community
Type the trap community, which is the password sent with each trap to the SNMP
manager. The default is public and allows all requests.
manager. The default is public and allows all requests.