ZyXEL Communications Corporation VMG1312T10C Manuel D’Utilisation

 Chapter 5 WAN Setup

VMG1312-T10C User’s Guide

Use this screen to edit your Device's advanced WAN settings. Click the Advanced Setup button in 
the More Connections Edit screen. The screen appears as shown.

More Connections: Edit: Advanced Setup

The following table describes the labels in this screen.  

Max Idle 
Timeout

Specify an idle time-out in the Max Idle Timeout field when you select Connect on 
Demand. The default setting of 0 means the Internet session will not timeout.

NAT

If you set the Mode field to Router, you can select SUA Only if you have one public IP 
address and want to use NAT.

Otherwise, select None to disable NAT.

Back

Click this to return to the previous screen without saving.

Apply

Click this to save your changes. 

Advanced Setup

Click this to display the More Connections Advanced Setup screen and edit more 
details of your WAN setup.

More Connections: Edit (continued)

NeMore Connections: Edit: Advanced Setup

RIP & Multicast Setup

RIP Direction

Select the RIP Direction from None, Both, In Only and Out Only.

RIP Version

You do not configure this field if you set the RIP Direction field to None.

Select the RIP Version from RIP-1, RIP-2B/RIP-2M.