ZyXEL Communications Corporation VMG1312T10C Manuel D’Utilisation
Chapter 5 WAN Setup
VMG1312-T10C User’s Guide
52
5.5 WAN Technical Reference
This section provides some technical background information about the topics covered in this
chapter.
chapter.
5.5.1 Encapsulation
Be sure to use the encapsulation method required by your ISP. The Device supports the following
methods.
methods.
5.5.1.1 ENET ENCAP
The Device only implements the MAC Encapsulated Routing Link Protocol (ENET ENCAP) with the IP
network protocol. IP packets get routed between the Ethernet interface and the WAN interface and
then formatted to work in a bridged environment. For instance, it encapsulates routed Ethernet
network protocol. IP packets get routed between the Ethernet interface and the WAN interface and
then formatted to work in a bridged environment. For instance, it encapsulates routed Ethernet
Dial String
Enter the phone number (dial string) used to dial up a connection to your service
provider’s base station. Your ISP should provide the phone number.
provider’s base station. Your ISP should provide the phone number.
For example, *99# is the dial string to establish a GPRS or 3G connection in Taiwan.
APN Code
Enter the APN (Access Point Name) provided by your service provider. Connections with
different APNs may provide different services (such as Internet access or MMS (Multi-
Media Messaging Service)) and charge method.
different APNs may provide different services (such as Internet access or MMS (Multi-
Media Messaging Service)) and charge method.
You can enter up to 31 ASCII printable characters. Spaces are allowed.
Obtain an IP
Address
Automatically
Address
Automatically
Select this option If your ISP did not assign you a fixed IP address.
Use the following
static IP address
static IP address
Select this option If the ISP assigned a fixed IP address.
IP Address
Enter your WAN IP address in this field if you selected Use the following static IP
address.
address.
Obtain DNS info
dynamically
dynamically
Select this to have the Device get the DNS server addresses from the ISP automatically.
Use the following
static DNS IP
address
static DNS IP
address
Select this to have the Device use the DNS server addresses you configure manually.
Primary DNS
server
Enter the first DNS server address assigned by the ISP.
Secondary DNS
server
Enter the second DNS server address assigned by the ISP.
Connection
Select Nailed-UP if you do not want the connection to time out.
Select On-Demand if you do not want the connection up all the time and specify an
idle time-out in the Max Idle Timeout field.
idle time-out in the Max Idle Timeout field.
Max Idle Timeout
This value specifies the time in minutes that elapses before the Device automatically
disconnects from the ISP.
disconnects from the ISP.
Apply
Click Apply to save your changes back to the Device.
Cancel
Click Cancel to return to the previous configuration.
Table 8
Network Setting > Broadband > 3G Backup (continued)
LABEL
DESCRIPTION