ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
Chapter 12 System
NWA5000 / WAC6500 Series User’s Guide
132
The following table describes the labels in this screen.
12.4.5 HTTPS Example
If you haven’t changed the default HTTPS port on the NWA/WAC, then in your browser enter
“https://NWA/WAC IP Address/” as the web site address where “NWA/WAC IP Address” is the IP
address or domain name of the NWA/WAC you wish to access.
“https://NWA/WAC IP Address/” as the web site address where “NWA/WAC IP Address” is the IP
address or domain name of the NWA/WAC you wish to access.
12.4.5.1 Internet Explorer Warning Messages
When you attempt to access the NWA/WAC HTTPS server, you will see the error message shown in
the following screen.
the following screen.
Table 66
Configuration > System > WWW > Service Control
LABEL
DESCRIPTION
HTTPS
Enable
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using secure HTTPs connections.
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using secure HTTPs connections.
Server Port
The HTTPS server listens on port 443 by default. If you change the HTTPS server port
to a different number on the NWA/WAC, for example 8443, then you must notify
people who need to access the NWA/WAC Web Configurator to use “https://NWA/WAC
IP Address:8443” as the URL.
to a different number on the NWA/WAC, for example 8443, then you must notify
people who need to access the NWA/WAC Web Configurator to use “https://NWA/WAC
IP Address:8443” as the URL.
Authenticate Client
Certificates
Certificates
Select Authenticate Client Certificates (optional) to require the SSL client to
authenticate itself to the NWA/WAC by sending the NWA/WAC a certificate. To do that
the SSL client must have a CA-signed certificate from a CA that has been imported as
a trusted CA on the NWA/WAC.
authenticate itself to the NWA/WAC by sending the NWA/WAC a certificate. To do that
the SSL client must have a CA-signed certificate from a CA that has been imported as
a trusted CA on the NWA/WAC.
Server Certificate
Select a certificate the HTTPS server (the NWA/WAC) uses to authenticate itself to the
HTTPS client. You must have certificates already configured in the My Certificates
screen.
HTTPS client. You must have certificates already configured in the My Certificates
screen.
Redirect HTTP to
HTTPS
HTTPS
To allow only secure Web Configurator access, select this to redirect all HTTP
connection requests to the HTTPS server.
connection requests to the HTTPS server.
HTTP
Enable
Select the check box to allow or disallow the computer with the IP address that
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using HTTP connections.
matches the IP address(es) in the Service Control table to access the NWA/WAC
Web Configurator using HTTP connections.
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service to access the NWA/WAC.
use the same port number in order to use that service to access the NWA/WAC.
Apply
Click Apply to save your changes back to the NWA/WAC.
Reset
Click Reset to return the screen to its last-saved settings.