ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation

Chapter 12 System

NWA5000 / WAC6500 Series User’s Guide

The following table describes the labels in this screen.  

This screen allows you to add or edit an SNMPv3 user profile. To access this screen, click the 
Configuration > System > SNMP screen’s Add button or select a SNMPv3 user profile from the 
list and click the Edit button.

Configuration > System > SNMP

Enable

Select the check box to allow or disallow users to access the NWA/WAC using SNMP.

Server Port

You may change the server port number for a service if needed, however you must use 
the same port number in order to use that service for remote management.

Trap

Community

Type the trap community, which is the password sent with each trap to the SNMP 
manager. The default is public and allows all requests.

Destination

Type the IP address of the station to send your SNMP traps to.

SNMPv2c

Select this to allow SNMP managers using SNMPv2c to access the NWA/WAC.

Get Community

Enter the Get Community, which is the password for the incoming Get and GetNext 
requests from the management station. The default is public and allows all requests.

Set Community

Enter the Set community, which is the password for incoming Set requests from the 
management station. The default is private and allows all requests.

SNMPv3

Select this to allow SNMP managers using SNMPv3 to access the NWA/WAC.

Add

Click this to create a new entry. Select an entry and click Add to create a new entry after 
the selected entry.

Edit

Double-click an entry or select it and click Edit to be able to modify the entry’s settings. 

Remove

To remove an entry, select it and click Remove. The NWA/WAC confirms you want to 
remove it before doing so. Note that subsequent entries move up by one when you take 
this action.

#

This the index number of an SNMPv3 user profile.

User Name

This is the name of the user for which this SNMPv3 user profile is configured.

Authentication

This field displays the type of authentication the SNMPv3 user must use to connect to the 
NWA/WAC using this SNMPv3 user profile.

Privacy

This field displays the type of encryption the SNMPv3 user must use to connect to the 
NWA/WAC using this SNMPv3 user profile.

Privilege

This field displays whether the SNMPv3 user can have read-only or read and write access 
to the NWA/WAC using this SNMPv3 user profile.

Apply

Click Apply to save your changes back to the NWA/WAC. 

Reset

Click Reset to return the screen to its last-saved settings.