ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
Chapter 16 LEDs
NWA5000 / WAC6500 Series User’s Guide
176
Figure 104
Maintenance > LEDs > Suppression
16.3 Locator Screen
The Locator feature identifies the location of your WAC among several devices in the network. You
can run this feature and set a timer in this screen.
can run this feature and set a timer in this screen.
To run the locator feature, enter a number of minutes and click Turn On button to have the WAC
find its location. The Locator LED will start to blink for the number of minutes set in the Locator
screen. The default setting is 10 minutes. While the locator is running, the turn on button will grey
out and return after it’s finished. If you make changes to the time default setting, it will be stored
as the defualt when the WAC restarts.
find its location. The Locator LED will start to blink for the number of minutes set in the Locator
screen. The default setting is 10 minutes. While the locator is running, the turn on button will grey
out and return after it’s finished. If you make changes to the time default setting, it will be stored
as the defualt when the WAC restarts.
Note: The Locator feature is not affected by the Suppression setting.
To access this screen, click Maintenance > LEDs > Locator.
Figure 105
Maintenance > LEDs > Locator