ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
Chapter 1 Introduction
NWA5000 / WAC6500 Series User’s Guide
24
The following are the LED descriptions for your NWA5301-NJ.
1.6.3 NWA5121-N, NWA5121-NI, and NWA5123-NI
The following are the LED descriptions for your NWA512x.
Table 7
NWA5301-NJ LEDs
LABEL
COLOR
STATUS
DESCRIPTION
PWR/SYS Amber
Slow
Blinking
(On for 1s,
Off for 1s)
Off for 1s)
The NWA is booting up.
Green
On
Amber
Off
The NWA is ready for use.
Green
On
Amber
Slow Blinking
(blink for 3
times, Off for
3s)
(blink for 3
times, Off for
3s)
The NWA is discovering an AP controller
Green
On
Amber
On
The NWA failed to boot up or is experiencing system failure.
Green
Off
Amber
Fast Blinking
(On for 50ms
times, Off for
50ms)
(On for 50ms
times, Off for
50ms)
The NWA is undergoing firmware upgrade.
Green
Off
Amber
Slow Blinking
(blink for 3
times, Off for
3s)
(blink for 3
times, Off for
3s)
Uplink is disconnected.
Green
Off
Amber
Slow Blinking
(blink for 2
times, Off for
3s)
(blink for 2
times, Off for
3s)
The wireless module of the WAC is disabled or failed.
Green
Off
PoE
Green
On
Power is supplied to the yellow PoE Ethernet port (LAN1).
Off
There is no power supply.
WLAN
Green
On
The WLAN is active.
Blinking
The WLAN is transmitting or receiving data.
Off
The WLAN is not active.
UPLINK
Green
On
The port is connected.
Blinking
The NWA/WAC is sending/receiving data through the port.
Off
The port is not connected.
LAN1-3
Green
On
The port is connected.
Blinking
The NWA/WAC is sending/receiving data through the port.
Off
The port is not connected.