ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
Chapter 4 Monitor
NWA5000 / WAC6500 Series User’s Guide
46
4.3.1 Network Status Graph
Use the port statistics graph to look at a line graph of packet statistics for the NWA/WAC’s physical
Ethernet port. To view, in the Network Status screen click the Switch to Graphic View button.
Ethernet port. To view, in the Network Status screen click the Switch to Graphic View button.
Action
Use this field to get or to update the IP address for the interface. Click Renew to send a
new DHCP request to a DHCP server. If the interface cannot use one of these ways to get
or to update its IP address, this field displays n/a.
new DHCP request to a DHCP server. If the interface cannot use one of these ways to get
or to update its IP address, this field displays n/a.
Port Statistics
Table
Table
Poll Interval
Enter how often you want this window to be updated automatically, and click Set Interval.
Set Interval
Click this to set the Poll Interval the screen uses.
Stop
Click this to stop the window from updating automatically. You can start it again by setting
the Poll Interval and clicking Set Interval.
the Poll Interval and clicking Set Interval.
Switch to
Graphic View
Graphic View
Click this to display the port statistics as a line graph.
Status
This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and
duplex setting (Full or Half).
duplex setting (Full or Half).
TxPkts
This field displays the number of packets transmitted from the NWA/WAC on the physical
port since it was last connected.
port since it was last connected.
RxPkts
This field displays the number of packets received by the NWA/WAC on the physical port
since it was last connected.
since it was last connected.
Collisions
This field displays the number of collisions on the physical port since it was last connected.
Tx
This field displays the transmission speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
one-second interval before the screen updated.
Rx
This field displays the reception speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
one-second interval before the screen updated.
Up Time
This field displays how long the physical port has been connected.
System Up Time
This field displays how long the NWA/WAC has been running since it last restarted or was
turned on.
turned on.
Table 21
Monitor > Network Status (continued)
LABEL
DESCRIPTION