ZyXEL Communications Corporation WAC6553D-E Manuel D’Utilisation
Chapter 6 Wireless
NWA5000 / WAC6500 Series User’s Guide
74
6.5 DCS
Use this screen to configure dynamic radio channel selection. Click Configuration > Wireless >
DCS to access this screen.
DCS to access this screen.
Figure 42
Configuration > Wireless > DCS
Each field is described in the following table.
6.6 Technical Reference
The following section contains additional technical information about the features described in this
chapter.
chapter.
Dynamic Channel Selection
When numerous APs broadcast within a given area, they introduce the possibility of heightened
radio interference, especially if some or all of them are broadcasting on the same radio channel. If
the interference becomes too great, then the network administrator must open his AP configuration
options and manually change the channel to one that no other AP is using (or at least a channel
that has a lower level of interference) in order to give the connected stations a minimum degree of
interference. Dynamic channel selection frees the network administrator from this task by letting
the AP do it automatically. The AP can scan the area around it looking for the channel with the least
amount of interference.
radio interference, especially if some or all of them are broadcasting on the same radio channel. If
the interference becomes too great, then the network administrator must open his AP configuration
options and manually change the channel to one that no other AP is using (or at least a channel
that has a lower level of interference) in order to give the connected stations a minimum degree of
interference. Dynamic channel selection frees the network administrator from this task by letting
the AP do it automatically. The AP can scan the area around it looking for the channel with the least
amount of interference.
In the 2.4 GHz spectrum, each channel from 1 to 13 is broken up into discrete 22 MHz segments
that are spaced 5 MHz apart. Channel 1 is centered on 2.412 GHz while channel 13 is centered on
2.472 GHz.
that are spaced 5 MHz apart. Channel 1 is centered on 2.412 GHz while channel 13 is centered on
2.472 GHz.
Table 36
Configuration > Wireless > DCS
LABEL
DESCRIPTION
Select Now
Click this to have the NWA/WAC scan for and select an available channel immediately.
Apply
Click Apply to save your changes back to the NWA/WAC.
Reset
Click Reset to return the screen to its last-saved settings.