ZyXEL Communications Corporation WAP5705 Manuel D’Utilisation
Chapter 5 Client Mode
WAP5705 User’s Guide
36
5.4 Setting your WAP5705 to Client Mode
1
To set your WAP5705 to client mode, see
2
Connect your computer to the LAN port of the WAP5705.
3
The default IP address of the WAP5705 in client mode is “192.168.1.10”. In this case, your
computer must have an IP address in the range between “192.168.1.11” and “192.168.1.254”.
computer must have an IP address in the range between “192.168.1.11” and “192.168.1.254”.
4
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
5
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.10” as the web address in your web browser.
type “http://192.168.1.10” as the web address in your web browser.
6
Enter “1234” (default) as the password and click Login.
7
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
8
The Easy mode appears. Click Expert Mode in the navigation panel.
5.5 Client Mode Status Screen
Click
to open the status screen.
Figure 22
Status: Client Mode