ZyXEL Communications Corporation WAP5705 Manuel D’Utilisation
Chapter 7 Tutorials
WAP5705 User’s Guide
60
7.5.1 Configuring Security Settings of Multiple SSIDs
This example shows you how to configure the SSIDs with the following parameters on your
WAP5705 (in access point mode).
WAP5705 (in access point mode).
1
Connect your computer to the LAN port of the WAP5705 using an Ethernet cable.
2
The default IP address of the WAP5705 is “192.168.1.2”. In this case, your computer must have an
IP address in the range between “192.168.1.3” and “192.168.1.254”.
IP address in the range between “192.168.1.3” and “192.168.1.254”.
3
Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” as the web address in your web browser.
type “http://192.168.1.2” as the web address in your web browser.
5
Enter “1234” (default) as the password and click Login.
6
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
7
The Easy mode appears. Click Expert Mode in the navigation panel.
8
Go to Configuration > Network > Wireless LAN > General. Configure the screen as follows. In
this example, you select Enable Intra-BSS Traffic for SSID_Worker and SSID_Guest to allow
wireless clients in the same wireless network to communicate with each other. Click Apply.
this example, you select Enable Intra-BSS Traffic for SSID_Worker and SSID_Guest to allow
wireless clients in the same wireless network to communicate with each other. Click Apply.
SSID
SECURITY TYPE
KEY
MAC FILTERING
SSID_Worker
WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNet
work
work
Disable
SSID_Guest
Static WEP 128bit
keyexample123
Disable
SSID_VoIP
WPA-PSK
VoIPOnly12345678
Allow
00:A0:C5:01:23:45