ZyXEL Communications Corporation WAP5805 Manuel D’Utilisation
Chapter 8 Wireless LAN
WAP5805 User’s Guide
52
8.5.1 Edit
Click Configuration > Network > Wireless LAN > More AP > Edit to modify AP settings.
No Security
Select No Security to allow wireless clients to communicate with the access points without any
data encryption.
data encryption.
Note: If you do not enable any wireless security on your WAP5605, your network is accessible to
any wireless networking device that is within range.
any wireless networking device that is within range.
Figure 30
Configuration > Network > Wireless LAN > More AP > Edit: No Security
The following table describes the labels in this screen.
Security
This displays the security type of the wireless device.
Edit
Click this icon to modify settings.
Table 18
Configuration > Network > Wireless LAN > More AP
LABEL
DESCRIPTION
Table 19
Configuration > Network > Wireless LAN > More AP > Edit: No Security
LABEL
DESCRIPTION
Wireless Setup
Active
Select this check box to activate and start the process.
Name (SSID)
The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the wireless LAN.
associated. Enter a descriptive name (up to 32 printable characters found on a typical
English language keyboard) for the wireless LAN.
Hide SSID
Select this check box to hide the SSID in the outgoing beacon frame so a wireless client
cannot obtain the SSID through scanning using a site survey tool.
cannot obtain the SSID through scanning using a site survey tool.
Intra-BSS
Traffic
Select this check box to enable the traffic for Intra-BSS.
Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled,
wireless
wireless
clients can access the wired network and communicate with each other.
When Intra-BSS is
disabled, wireless clients can still access the wired network but cannot
communicate with each other.