ZyXEL Communications Corporation WAP5805 Manuel D’Utilisation

Chapter 8 Wireless LAN

WAP5805 User’s Guide

The following table describes the labels in this menu.

Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold 
and high-throughput physical mode settings.

Click Configuration > Network > Wireless LAN > Advanced. The screen appears as shown.

Configuration > Network > Wireless LAN > Advanced

The following table describes the labels in this screen. 

Configuration > Network > Wireless LAN > MAC Filter

SSID

Select the SSID for which you want to configure MAC filtering.

MAC Address 
Filter

You can use the MAC address filter to tell the AP which wireless clients are allowed or not 
allowed to use the wireless network. If a wireless client is allowed to use the wireless network, 
it still has to have the correct settings (SSID, channel, and security). If a wireless client is not 
allowed to use the wireless network, it does not matter if it has the correct settings.

Filter Action

Choose from Allow or Deny for the filter action setting.

MAC Filter Summary

Set

This field displays the set by number.

MAC Address

This is the MAC address of the wireless station that are allowed or denied access to the 
WAP5805.

Apply

Click Apply to save your changes back to the WAP5805.

Cancel

Click Cancel to reload the previous configuration for this screen.

Configuration > Network > Wireless LAN > Advanced

RTS/CTS 
Threshold

Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS 
(Clear To Send) handshake. 

Enter a value between 256 and 2346. 

Fragmentation 
Threshold

The threshold (number of bytes) for the fragmentation boundary for directed messages. It is 
the maximum data fragment size that can be sent. Enter an even number between 256 and 
2346.