ZyXEL Communications Corporation WAP6806 Manuel D’Utilisation
Chapter 4 Access Point Mode
WAP6806 User’s Guide
24
4.3.1 Setting your WAP6806 to AP Mode
By default, AP mode in the WAP6806 is not configured with a static IP address. To setup your
WAP6806 in AP mode for the first time, the directly-connected router must have the DHCP server
function enabled.
WAP6806 in AP mode for the first time, the directly-connected router must have the DHCP server
function enabled.
1
Connect one end of an Ethernet cable to the Ethernet port on the WAP6806 and the other end to
your router.
your router.
2
Connect your computer to your network, make sure both the WAP6806 and computer are under the
same subnet.
same subnet.
3
Open a web browser window and type “http://zyxelsetup” or “http://192.168.1.2” in the web
address.
The login screen displays.
address.
The login screen displays.
4
Enter “1234” (default) as the password and click Login.
5
Type a new password and retype it to confirm, then click Change. Otherwise, click Skip.
The WAP6806 Web Configurator displays, which allows you to configure the AP mode. See
for details.
4.3.2 Configuring your WLAN, LAN and Maintenance Settings
for information on configuring your
wireless network and LAN settings.
for information on configuring your Maintenance settings.
4.4 AP Mode Status Screen
Click
to open the Status screen.