ZyXEL Communications Corporation WAP6806 Manuel D’Utilisation
Chapter 11 Ethernet
WAP6806 User’s Guide
61
The following table describes the labels in this screen.
11.4 IP Alias Screen
IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The WAP6806 supports three logical LAN interfaces via its single physical
Ethernet interface with the WAP6806 itself as the gateway for each LAN network.
Ethernet interface. The WAP6806 supports three logical LAN interfaces via its single physical
Ethernet interface with the WAP6806 itself as the gateway for each LAN network.
Use this screen to have the WAP6806 apply IP alias to create LAN subnets. Click Configuration >
Network > Ethernet > IP Alias.
Network > Ethernet > IP Alias.
Figure 48
Configuration > Network > Ethernet > IP Alias
The following table describes the labels in this screen.
Table 24
Configuration > Network > Ethernet > LAN Setup
LABEL
DESCRIPTION
Get from DHCP
Server
Server
Select this to have the WAP6806 get a dynamic IP address from a DHCP server.
Use Static IP
Address
Address
Click this to enable the manual IP configuration.
IP Address
Enter the IP address of your WAP6806 in dotted decimal notation.
Subnet Mask
Enter the subnet mask of your WAP6806 in dotted decimal notation.
Default Gateway
Enter the gateway of your WAP6806 in dotted decimal notation.
Confirm
Click Confirm to save your changes.
Reset
Click Reset to reload the previous configuration for this screen.
Table 25
Configuration > Network > Ethernet > IP Alias
LABEL
DESCRIPTION
IP Address
Enter the IP alias address of your WAP6806 in dotted decimal notation.
Subnet Mask
Enter the subnet mask of the IP alias in dotted decimal notation.
Confirm
Click Confirm to save your changes.
Reset
Click Reset to reload the previous configuration for this screen.