ZyXEL Communications Corporation WAP6906 Manuel D’Utilisation

 Chapter 4 Expert Mode

WAP6906 User’s Guide

The following table describes the labels shown in the Status screen.  

Use the menu in the navigation panel to configure WAP6906 features. 

Click this icon to see the Configuration navigation menu. 

Click this icon to see the Maintenance navigation menu. 

Table 5   Status Screen Icon Key  (continued)

Table 6   Status Screen 

Device Information

Device Name

This is the WAP6906’s model name.

Software Version

This is the firmware version and the date created. 

Device Mode

This is the device mode to which the WAP6906 is set - Repeater Mode.

Current Partition

This shows which partition the WAP6906 uses. The WAP6906 has two partitions and supports dual 
image function.

LAN Information

Eth0 MAC Address

This shows the MAC Address of the WAP6906’s first Ethernet LAN port.

Eth1 MAC Address

This shows the MAC Address of the WAP6906’s second Ethernet LAN port.

IP Address

This shows the LAN port’s IP address.

IP Subnet Mask

This shows the LAN port’s subnet mask.

Gateway IP

This shows the LAN port’s gateway IP address.

IPv6 Address

This shows the LAN port’s IPv6 address.

IPv6 Link Local Address

This shows the LAN port’s current IPv6 link-local address.

IPv6 Gateway

This shows the LAN port’s gateway IPv6 address.

Wireless Network Information - 5 GHz/2.4 GHz

MAC Address

This shows the MAC address of the WAP6906’s wireless interface.

Wireless Network

This shows if the wireless network is enabled or disabled.

Name (SSID)

This shows a descriptive name used to identify the WAP6906 in the wireless LAN. 

Link Rate (Mbps)

This shows the rate at which data is transferred across the wireless network.

Current Channel

This shows the channel number which you select manually or the WAP6906 automatically scans 
and selects.

Authentication

This shows the data encryption method the WAP6906 uses for the wireless connection.

Mode

This shows the wireless standard the WAP6906 uses.

WPS Status

This displays Configured when the WPS has been set up.

This displays Unconfigured if the WPS has not been set up.

System Status

System Up Time

This is the total time the WAP6906 has been on.

Current Date/Time

This field displays your WAP6906’s present

 

date and time.