ZyXEL Communications Corporation WAP7205 Manuel D’Utilisation

Chapter 1 Introducing the WAP7205

WAP7205 User’s Guide

If you forget your password or IP address, or you cannot access the Web Configurator, press the RESET 
button for more than 5 seconds to reload the factory-default configuration file. This means that you will 
lose all configurations that you had previously saved, the password will be reset to the default Wi-Fi key. 

Make sure the power LED is on.

Press and hold the RESET button. After 5 seconds, the power LED begins flashing.

Release the RESET button. The WAP7205 reloads factory defaults and begins to reboot.

Your WAP7205 supports Wi-Fi Protected Setup (WPS), which is an easy way to set up a secure wireless 
network. WPS is an industry standard specification, defined by the Wi-Fi Alliance.

WPS allows you to quickly set up a wireless network with strong security, without having to configure 
security settings manually. Each WPS connection works between two devices. Both devices must 
support WPS (check each device’s documentation to make sure).

Wi-Fi 2.4G 

Wi-Fi 5G

White

On

The WAP7205’s wireless LAN is ready. 

Blinking

The WAP7205 is transmitting and/or receiving traffic through the 
wireless LAN.

Off

The wireless LAN is disabled.

Amber

Blinking

The WAP7205 is negotiating a WPS connection with a wireless 
device. 

Off

The WPS 

process completed, WPS connection failed or

 WPS is 

disabled.

MoCA

White

On

The MoCA port is connected and the WAP7205 detects another 
MoCA device. 

Blinking

The WAP7205 is communicating with another MoCA device. 
Data is being transmitted and/or received through the coaxial 
cables.

Off

The MoCA port is not connected, or the WAP7205 does not 
detect another MoCA device.

LAN1~2

Green

On

This port has a successful link to an Ethernet network.

Blinking

The WAP7205 is sending or receiving packets to/from an Ethernet 
network on this port.

Off

There is no connection on this port.

Table 1   WAP7205 LEDs