ZyXEL Communications Corporation WAP7205 Manuel D’Utilisation
Chapter 7 LAN
WAP7205 User’s Guide
47
The following table describes the labels in this screen.
7.5 IP Alias Screen
Use this screen to have the WAP7205 apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 30 Network > LAN > IP Alias
Table 24 Network > LAN > IP
LABEL
DESCRIPTION
Obtain an IP
Address
Automatically
Address
Automatically
Click this to deploy the WAP7205 as a DHCP client in the network.
When you enable this, the WAP7205 gets its IP address from the network’s DHCP server (for
example, your ISP or router). Users connected to the WAP7205 can now access the network
(i.e., the Internet if the IP address is given by the ISP or a router with Internet access).
example, your ISP or router). Users connected to the WAP7205 can now access the network
(i.e., the Internet if the IP address is given by the ISP or a router with Internet access).
The Web Configurator may no longer be accessible unless you know the IP address assigned
by the DHCP server to the WAP7205.
by the DHCP server to the WAP7205.
Also when you select this, you cannot enter an IP address for your WAP7205 in the field
below.
below.
Static IP Address
Click this if you want to specify the IP address of your WAP7205. Or if your ISP or network
administrator gave you a static IP address to access the network or the Internet.
administrator gave you a static IP address to access the network or the Internet.
IP Address
Type the IP address in dotted decimal notation. If you change the IP address you will have
to log in again with the new IP address.
to log in again with the new IP address.
Subnet Mask
The subnet mask specifies the network number portion of an IP address.
Gateway IP Address Enter a gateway IP address (if your ISP or network administrator gave you one) in this field.
DNS Server
First DNS Server
Second DNS Server
Select Obtained From ISP if your ISP or router to which the WAP7205 connects dynamically
assigns DNS server information (and the WAP7205's IP address). The field to the right displays
the (read-only) DNS server IP address that the ISP assigns.
assigns DNS server information (and the WAP7205's IP address). The field to the right displays
the (read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP
address in the field to the right.
address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
server, you must know the IP address of a computer in order to access it.
Apply
Click Apply to save your changes back to the WAP7205.
Cancel
Click Cancel to reload the previous configuration for this screen.