ZyXEL Communications Corporation WAP7205 Manuel D’Utilisation

 Chapter 10 Maintenance

WAP7205 User’s Guide

Figure 37   Maintenance > Backup/Restore 

The following table describes the labels in this screen.

Note: If you uploaded the default configuration file you may need to change the IP address 

of your computer to be in the same subnet as that of the WAP7205 IP address. 

System restart allows you to reboot the WAP7205 without turning the power off. 

Click Maintenance > Restart to open the following screen. 

Table 31   Maintenance > Backup/Restore

Backup

Click Backup to save the WAP7205’s current configuration to your computer.

File Path 

Type in the location of the file you want to upload in this field or click Browse... to find it.

Browse... / 
Choose file

Click Browse... or Choose file to find the file you want to upload. Remember that you must 
decompress compressed (.ZIP) files before you can upload them. 

Upload 

Click Upload to begin the upload process.

Note: Do not turn off the WAP7205 while configuration file upload is in progress.

After you click Upload, you must then wait one minute before logging into the WAP7205 again. 
The WAP7205 automatically restarts in this time causing a temporary network disconnect.

Reset

Pressing the Reset button in this section clears all user-entered configuration information and 
returns the WAP7205 to its factory defaults.

You can also press the RESET button on the rear panel to reset the factory defaults of your 
WAP7205. Refer to the chapter about introducing the Web Configurator for more information 
on the RESET button.