ZyXEL Communications Corporation WRE2205 Manuel D’Utilisation
WRE2205 User’s Guide
13
C
H A P T E R
2
The Web Configurator
2.1 Overview
This chapter describes how to access the WRE2205 Web Configurator and provides an overview of
its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the WRE2205 via Internet browser. Use Internet Explorer 6.0 and later versions,
Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
management of the WRE2205 via Internet browser. Use Internet Explorer 6.0 and later versions,
Mozilla Firefox 3 and later versions, or Safari 2.0 and later versions. The recommended screen
resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
• Java permissions (enabled by default).
to see how to make sure these functions are allowed in
Internet Explorer.
2.2 Accessing the Web Configurator
1
Make sure your WRE2205 hardware is properly connected and prepare your computer or computer
network to connect to the WRE2205 (refer to the Quick Start Guide).
network to connect to the WRE2205 (refer to the Quick Start Guide).
2
Launch your web browser.
3
If this is the first time you are accessing your WRE2205, type "http://192.168.1.2" as the website
address in your web browser. This is the default LAN IP address. Alternatively, after the WRE2205
has successfully connected to an AP, type "http://zyxelsetupxxxx" instead of the default IP address,
where xxxx is the last four digits of the MAC address.
address in your web browser. This is the default LAN IP address. Alternatively, after the WRE2205
has successfully connected to an AP, type "http://zyxelsetupxxxx" instead of the default IP address,
where xxxx is the last four digits of the MAC address.
Your computer must be in the same subnet in order to access this website address. In it’s initial
configuration, the WRE2205 can assign your computer an IP address, so you must set your
computer to get an IP address automatically (computer factory default).
configuration, the WRE2205 can assign your computer an IP address, so you must set your
computer to get an IP address automatically (computer factory default).
4
Type admin (default) as the user name and 1234 (default) as the password and click OK.