ZyXEL Communications Corporation WRE2205 Manuel D’Utilisation
Chapter 6 Wireless LAN
WRE2205 User’s Guide
48
Figure 33
Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
6.10 AP Select Screen
Use this screen to choose an access point that you want the WRE2205 to connect to. You should
know the security settings of the target AP.
know the security settings of the target AP.
To open this screen, click Network > Wireless LAN > AP Select tab.
Figure 34
Network > Wireless LAN > AP Select
Table 17
Network > Wireless LAN > WPS Station
LABEL
DESCRIPTION
Config Mode
Use this to select Registrar or Enrollee mode. Select Registrar mode to make wireless
clients follow the wireless settings of the WRE2205. Select Enrollee mode to make the
WRE2205 follow the wireless settings of an access point.
clients follow the wireless settings of the WRE2205. Select Enrollee mode to make the
WRE2205 follow the wireless settings of an access point.
Push Button
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations’s wireless settings. See
wireless stations’s wireless settings. See
.
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
information synchronization.
Input station’s
PIN number
PIN number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings. See
wireless settings. See
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
associate to each other and perform the wireless security information synchronization.