ZyXEL Communications Corporation WRE2206 Manuel D’Utilisation

Chapter 5 Tutorials

WRE2206 User’s Guide

• Connecting to an AP with the WPS PIN method - create a secure wireless network simply by 

entering the WRE2206's PIN (Personal Identification Number) in the AP’s interface. See 

. This is the more secure method, since one device can authenticate the other.

• Selecting an AP from an Automatically Detected List - create a secure wireless network 

simply by selecting an AP from a list of detected APs. See 

.This is the 

easier method.

• Selecting an AP by Manually Entering Security Information - create a secure wireless 

network by manually entering the AP’s wireless security settings in the WRE2206’s interface. See 

. This is useful when the AP is hidden.

This section gives you an example of how to connect to an AP using WPS PBC. This example uses 
the WRE2206 as the enrollee and an AP as the registrar.

Make sure that your WRE2206 is turned on and that it is within range of the AP. 

Make sure that you have installed the AP and have access to the configuration interface of the AP or 
the AP’s WPS button.

Log into WRE2206’s Web Configurator and navigate to the Network > Wireless LAN > WPS 
Station screen. Select Enrollee in Config Mode and press Start PBC.

In the configuration interface of the AP, find the WPS settings. Enable WPS and press the WPS 
button (Start or WPS button)

Note: Your WRE2206 has a WPS button located on its panel, as well as a WPS button in 

its configuration utility. Both buttons have exactly the same function; you can use 

one or the other.

Note: It doesn’t matter whether you press the button on the WRE2206 or the AP first. 

WPS times out after two minutes of pressing a button. Press the button on the 

second device within about a minute of the first, then wait two minutes for the WPS 

configuration to complete.  

The AP sends the proper configuration settings to the WRE2206. Then the WRE2206 is able to 
communicate with the AP securely. 

The following figure shows an example of how to set up wireless network and security by pressing a 
button on both WRE2206 and AP.