ZyXEL Communications Corporation WRE6505 Manuel D’Utilisation

 Chapter 9 Wireless LAN

WRE6505 User’s Guide

Note: After you click Push Button on this screen, you have to press a similar button in 

the wireless station utility within 2 minutes. To add the second wireless station, you 

have to press these buttons on both device and the wireless station again after the 

first 2 minutes.

Network > Wireless LAN (2.4/5G) > WPS Station

The following table describes the labels in this screen.

Use this screen (available in AP mode only) to set the times your wireless LAN is turned on and off. 
Wireless LAN scheduling is disabled by default. The wireless LAN can be scheduled to turn on or off 
on certain days and at certain times. To open this screen, click Network > Wireless LAN (2.4/
5G) > Scheduling tab.

Network > Wireless LAN (2.4/5G)> WPS Station

Push Button

Use this button when you use the PBC (Push Button Configuration) method to configure 
wireless stations’s wireless settings. See 

.

Click this to start WPS-aware wireless station scanning and the wireless security 
information synchronization. 

Or input station’s 
PIN number

Use this button when you use the PIN Configuration method to configure wireless station’s 
wireless settings. See 

Type the same PIN number generated in the wireless station’s utility. Then click Start to 
associate to each other and perform the wireless security information synchronization.