ZyXEL Communications Corporation WRE6505V2 Manuel D’Utilisation

 Chapter 13 Troubleshooting

WRE6505 v2 User’s Guide

I cannot access the Internet.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick 
Start Guide.

Try to connect directly to the AP. If you can access the Internet, check that the WRE6505 v2 
(repeater mode) has associated with the AP by checking the St at us screen. See 

If you are trying to access the Internet wirelessly, make sure the wireless settings in the wireless 
client are the same as the settings in the AP.

Disconnect all the cables from your device, and follow the directions in the Quick Start Guide again. 

If the problem continues, contact the network administrator or vendor.

I cannot access the Internet anymore. I had access to the Internet (with the WRE6505 v2 in 
repeater mode), but my Internet connection is not available anymore.

Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick 
Start Guide and 

. 

Reboot the WRE6505 v2.

Try to connect directly to the AP. If you can access the Internet, check that the WRE6505 v2 
(repeater mode) has associated with the AP by checking the St at us screen. See 

If the problem continues, contact the network administrator or vendor. 

The Internet connection is slow or intermittent.

There might be a lot of traffic on the network. Look at the LEDs, and check 

. 

If the WRE6505 v2 is sending or receiving a lot of information, try closing some programs that use 
the Internet, especially peer-to-peer applications.

Check the signal strength. If the signal strength is low, try moving the WRE6505 v2 closer to the AP 
if possible, and look around to see if there are any devices that might be interfering with the 
wireless network (for example, microwaves, other wireless networks, and so on).

Reboot the WRE6505 v2.