ZyXEL Communications Corporation WRE6606 Manuel D’Utilisation
Chapter 4 Access Point Mode
WRE6606 User’s Guide
22
4.3 What You Need to Know
With the exception of the Scheduling and Guest W LAN screens, other configuration screens in
Access Point mode are similar to the ones in repeater mode. See
Access Point mode are similar to the ones in repeater mode. See
of this
User’s Guide.
4.3.1 Setting your WRE6606 to AP Mode
By default, AP mode in the WRE6606 is not configured with a static IP address. To setup your
WRE6606 in AP mode for the first time, the directly-connected router must have the DHCP server
function enabled.
WRE6606 in AP mode for the first time, the directly-connected router must have the DHCP server
function enabled.
1
To use your WRE6606 as an access point, See
2
Connect one end of an Ethernet cable to the Ethernet port on the WRE6606 and the other end to
your router.
your router.
3
Connect your computer to your network, make sure both the WRE6606 and computer are under the
same subnet.
same subnet.
4
Open a web browser window and type “http://zyxelsetup” in the web address.
The login screen displays.
The login screen displays.
5
Enter “1234” (default) as the password and click Login.
6
Type a new password and retype it to confirm, then click Apply. Otherwise, click I gnore.
The WRE6606 Web Configurator displays, which allows you to configure the AP mode.
4.3.2 Configuring your WLAN, LAN and Maintenance Settings
for information on configuring your
wireless network and LAN settings.
for information on configuring your Maintenance settings.
4.4 AP Mode Status Screen
Click
to open the St at us screen.