ZyXEL Communications Corporation WRE6606 Manuel D’Utilisation
Chapter 13 Maintenance
WRE6606 User’s Guide
83
The following table describes the labels in this menu.
13.4 System Password Screen
Use this screen to set the web configurator password. Click Maint enance > Syst em . The following
screen displays.
screen displays.
Figure 60 Maintenance > Password
The following table describes the labels in this screen.
13.5 Time Screen
Use this screen to configure the WRE6606’s time based on your local time zone. To change your
WRE6606’s time and date, click Maint enance > Tim e. The screen appears as shown.
WRE6606’s time and date, click Maint enance > Tim e. The screen appears as shown.
Table 31 Maintenance > General
LABEL
DESCRIPTION
System Name
Enter a descriptive name to identify the WRE6606 in an Ethernet network.
Domain Name
This is the domain name of the WRE6606.
Administrator
Inactivity
Timer
Inactivity
Timer
Type how many minutes a management session can be left idle before the session times out.
After it times out you have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never times out, no matter
how long it has been left idle (not recommended).
After it times out you have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never times out, no matter
how long it has been left idle (not recommended).
Apply
Click Apply to save your changes back to the WRE6606.
Reset
Click Reset to reload the previous configuration for this screen.
Table 32 Maintenance > System > Password
LABEL
DESCRIPTION
Old Password
Type the default password or the existing password you use to access the system in this
field.
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a
password, the screen displays an asterisk (*) for each character you type.
password, the screen displays an asterisk (*) for each character you type.
Retype to Confirm
Type the new password again in this field.
Apply
Click Apply to save your changes back to the WRE6606.
Reset
Click Reset to reload the previous configuration for this screen.