ZyXEL Communications Corporation WRE6606 Manuel D’Utilisation

Chapter 14 Troubleshooting

WRE6606 User’s Guide

• Check the settings for QoS. If it is disabled, you might consider activating it.

If you reset the WRE6606, you lose all of the changes you have made. The WRE6606 re-loads its 
default settings, and the password resets to 1 2 3 4 . You have to make all of your changes again.

You will lose all of your changes when you reset the WRE6606 to its factory defaults.

To reset the WRE6606,

Make sure the power LED is on.

Press the W PS button for longer than 10 seconds, the Power LED begins to blink, to set the 
WRE6606 back to its factory-default configuration.

OR

Click Maint enance >  Backup Rest ore > Rest ore and then click Reset .

If the WRE6606 restarts automatically, wait for the WRE6606 to finish restarting, and log in to the 
Web Configurator. The password is 1 2 3 4 .

If the WRE6606 does not restart automatically, disconnect and reconnect the WRE6606’. Then, 
follow the directions above again.

I cannot access the WRE6606 or ping any computer from the WLAN.

Make sure the wireless LAN is enabled on the WRE6606.

Make sure the wireless adapter on the wireless station is working properly.

Make sure the wireless adapter installed on your computer is IEEE 802.11 compatible and supports 
the same wireless standard as the WRE6606.

Make sure your computer (with a wireless adapter installed) is within the transmission range of the 
WRE6606.