Digigram PCX924HR Manuel D’Utilisation

VX222HR & VX222HR-Mic 

 

7

•  1 analog microphone input with 

- high-quality preamplifier 

 

- switchable 48 V phantom power  
 - analog expander/compressor/limiter 

 

This input is mixed with the two line inputs before A/D conversion. 

•  1 AES/EBU Sync input 

•  The AES/EBU input is AES42 compatible and features a hardware sample 

rate converter (for details see chapter ‘Specifications’)  
The two AES/EBU inputs on the VX222HR-Mic allow: 

 

- recording of a digital signal on the AES/EBU data input; this input is 
  also used as source of synchronization with a digital clock 

 

- recording of a digital signal on the AES/EBU data input, synchronized 
  on a digital clock connected to the AES/EBU synchronization input; 
- the synchronization of analog recording and playback on an AES/EBU 
  clock connected to the AES/EBU Sync input. 

 

  The selection of the digital input excludes the selection of the analog 
 inputs. 

•  Real-time, simultaneous PCM record and playback (8, 16 and 24 bits), 

Float IEEE754 (with 24-bit fixed-point dynamic range) 

•  When using the np SDK, real-time on-board mixing of several PCM 

audio streams, direct monitoring, level adjustment, panning, cross-fades, 
punch-in/punch-out, scrubbing 

•  Possibility to control the parameters of the inputs and outputs (gains, 

mutes, 48 V switch, analog compressor-limiter-expander parameters), 
from the provided ‘Digigram Hardware Settings’ application, or from any 
application that addresses these controls 

•  24-bit DSP effects in playback and recording: 3-band parametric 

equalizer plus Maximizer 

•  Low latency DirectSound, Wave, and ASIO drivers