Digigram X1222HR Manuel D’Utilisation

VX1220HR, VX1221HR & VX1222HR 

 

7

• 

Pentium III minimum (or equivalent) 

• 

128 MB RAM 

• 

One free PCI or PCI-X slot (5 V or 3.3 V) 

To use your VX1220HR, VX1221HR or VX1222HR, install the driver from the 
np Runtime HR package version 1.01 or higher. This package includes a 
WDM DirectSound driver. The Microsoft DirectX runtime version 9 or higher 
must also be installed on your computer. 
The cards can also be used with applications based on Digigram’s np SDK. 
The card is visible through the np interface and the DirectSound interface. 
HR Runtime also includes a 

Wave

 and an ASIO driver. 

VX1220HR, VX1221HR, and VX1222HR cards run under Windows 2000 and 
Windows XP. 
 
 

The card has to be installed in the computer prior to installing its driver. 

Gently plug the card in a free PCI slot and press it down to position it firmly. 
Tighten the screw. 

Hardware interrupt and addresses are automatically set up at start-up by the 
PCI PnP BIOS. 
 

Please visit the Digigram web site at www.digigram.com for the most recent 
driver. 

In case you run a specific application developed or installed by a Digigram 
Partner, this application might require the use of a specific driver version. In 
this case, make sure that the updated driver has been approved by your 
supplier.