Digigram X882HR Manuel D’Utilisation

  D   i   g   i   g   r   a   m    

 

 

8

• 

Choose the destination folder where Setup will install the 
application files (\pcxnp by default). Please note that driver files are 
installed in \windows\system32\Drivers\Digigram\PCXHR. Click on 
Next 

• 

Check the “Driver for the HR board” check-box option. 

• 

Select the program folder where the program icons will be added 
(default DIGIGRAM). Click on Next. 

• 

Click on Next to start copying the files. 

• 

Click on Continue anyway in the “Hardware installation” window 
(Windows XP). 

• 

In the “Digigram drivers” window, “PCX HR Settings” tab select 
the number and the size of buffers required by your applications. 
Click on Ok. 

• 

Click on Finish to complete the driver installation. 

 

• 

Open the Windows Control Panel and double-click on the 
Add/Remove Software icon.  

• 

Select 'Digigram HR Runtime…', and Change/Remove. 

• 

Select Remove in the “HR Runtime” window. 

• 

Follow the instructions to finish to remove the driver. 

 

Once the driver and the cards are installed according to the procedure 
described in this manual, you can verify that the card is properly installed and 
works fine as follows: 

• 

Go to 

and select 

<Digigram Control Center>. 

• 

In the “Digigram drivers” window, select the General Information 
tab. In the “Modules Information” window, you can see the HR 
Runtime modules that have been installed and their versions. 

• 

In the “Digigram drivers” window, select the Diagnostics tab. 
You should see here the icons of the cards you have installed. 

If the card you have installed is listed: 

• 

Right click on the icon of the card.