Garmin International Inc 00726 Manuel D’Utilisation

13

Another feature is the ability to send a specifi c location 

to other Rino users. This can come in handy if you are 
trying to round-up the group, or just want to meet at a 
specifi c location. You may send any point found from 
the Find ‘N Go menu. If the unit needs to wait until 10 
seconds have elapsed since the last position transmission, 
a  “Waiting to send location...” message will appear until 
the unit is able to transmit. If a location is sent more than 
once, a number will automatically be added to the end of 
the name (CAMP, CAMP 1, CAMP 2, etc.).

1. Press 

the 

CLICK STICK IN and hold it until the 

Shortcuts Menu is displayed.

2.  Highlight “‘Find ‘N’ Go’” and press the CLICK 

STICK IN.

3.  Highlight the desired category and press the CLICK 

STICK IN. ( For the Contacts List, select the desired 
contact and press the CLICK STICK IN.)

4.  Depending on which category you select, highlight 

the desired item and press IN on the CLICK STICK to 
display the Information page for that item.

5.  From the Information Page, highlight the Options 

Menu in the upper right and press IN on the CLICK 
STICK.

6.  Highlight ‘Send Location’ and press IN again. The 

unit will now send the point to the other Rino users 
on your channel/code. If using the Scramble feature, 
receiving radios must also have Scramble enabled.

190-00284-00_Prelim_FCC.indd   13

9/18/2003, 3:50:54 PM